SR-800

Cinema Surround Loudspeaker

The SR-800 Cinema Surround Loudspeaker is a two-way design that features an 8″ (203mm) low-frequency transducer with a 1″ dome tweeter. The 125 watt continuous power rating and sophisticated crossover circuitry provides absolute reliability.

The SR-800 is designed for safe and secure mounting. The cabinet is constructed of 12mm MDF with internal bracing for superior structural integrity. The rear panel of the cabinet is fitted with four threaded insert mounting points that accommodate the standard bolt pattern for most third- party bracket manufacturers. Included pre- installed speaker side hardware allows fast single-installer wall mounting, and brackets support down-angles of either 15° (QM-SW, ordered separately) or 23° (QM-BW, ordered separately). A traditional U-bracket “yoke” style bracket (YM-300) is also available.

The compact black enclosure with black grille blends into any theatre decor.

Resources

SR-800 Cinema Surround Speaker Overview

The DCS SR-800 is a two-way cinema surround loudspeaker featuring an 8-inch (203 mm) low-frequency driver and a 1-inch (25 mm) dome tweeter. Designed with wide 135° conical coverage, the SR-800 delivers up to 117 dB peak SPL with a 125-watt continuous power rating for reliable surround performance in compact to mid-sized auditoriums.

Engineered for Flexible Cinema Installations

With a frequency range of 60 Hz to 20 kHz and 90 dB sensitivity, the SR-800 provides broad surround field distribution for immersive cinema environments. The 12 mm MDF enclosure with internal bracing ensures structural integrity, while integrated mounting hardware and compatibility with QM-SW, QM-BW, and YM-300 brackets allow secure and adaptable installation.

Applications

  • Compact to mid-sized cinema auditoriums
  • Wide-coverage surround channel installations
  • Multiplex theater environments
  • Retrofit surround speaker upgrades

Features

  • High Performance for all Cinema applications
  • 8″ (203 mm) woofer
  • 1″ (25 mm) dome tweeter
  • Pre-installed speaker-side QM mounting hardware
  • Accepts YM-300 yoke bracket
SPECIFICATIONS SR-800
Frequency Range 1
(-10dB, Half space)		 60 Hz to 20 kHz
Rated Coverage Angle (-6 dB) 135° conical
Maximum Rated SPL 4
Calculated Peak at rated power
Calculated Continuous		 117 dB
111 dB
Rated Impedance 8 ohms
Rated Noise Power2
Recommended Amplifier Power		 125 watts
400 watts
Sensitivity3 90 dB
Input Connector
Two 5-way binding posts, accepts up to #10 AWG stranded
wire
Transducers
8” (203 mm) LF driver

1” (25 mm)
dome tweeter

Enclosure Material
12mm
MDF with black vinyl wrap, matte finish

Dimensions (HWD) inches
14.4 x 11.7 x 9 inches
Dimensions (HWD) mm
365 x
298 x 228.5 mm

Net Weight 14.3 lb (6.5 kg)
Brackets
QM-SW, QM-BW, YM-300

1 Free-field, -10 dB from on-axis sensitivity

2 AES2-1984 noise signal for 2 Hrs

3 On-axis, free-field sensitivity, 1W, 1 m

4 Calculated from rated noise voltage and sensitivity

Specifications are subject to change without notice.